Hive build 004 power supply complete
Verfasst: Do 10. Jul 2014, 17:34
I thought I would share my build with photographs
firstly i used a multicore solder and had no problems, see third picture
the three green jumpers were tested for the voltages of Gnd,5v,3.3v all present when of course the white jumper next to the powerjack is on the middle pins
see pictures, next for build 005 and 006 when the mmc/sd socket arrives
can not decide which to use, the serial host connection or the prop plug which basically is a usb to ttl adapter and of course has to work with windows 8.1
feel free to post a reply
firstly i used a multicore solder and had no problems, see third picture
the three green jumpers were tested for the voltages of Gnd,5v,3.3v all present when of course the white jumper next to the powerjack is on the middle pins
see pictures, next for build 005 and 006 when the mmc/sd socket arrives
can not decide which to use, the serial host connection or the prop plug which basically is a usb to ttl adapter and of course has to work with windows 8.1
feel free to post a reply
